316L / 1.4404 Stainless Steel Strip Coil

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@shandongtisco.com to get prompt reply.

Free shipping on orders over $50!

  • Check Mark Satisfaction Guaranteed
  • Check Mark No Hassle Refunds
  • Check Mark Secure Payments
  • Visa Card
  • MasterCard
  • American Express
  • Discover Card
  • PayPal
GUARANTEED SAFE CHECKOUT

316L / 1.4404 Stainless Steel Strip Coil

What should I pay attention to when maintaining?

1). Sanitary valves should be placed in a dry and ventilated room, and both ends of the diameter must be sealed to prevent dust;
2). Long-term storage should be checked regularly and oiled on the processed surface to prevent rust;
3). Before installing the sanitary valve, carefully check whether the mark conforms to the requirements for use;
4). Clean the inner cavity and sealing surface during installation, check whether the packing is tightly pressed, and whether the connecting bolts are evenly tightened;
5). Sanitary valves should be installed in accordance with the allowable working position, but attention must be paid to the convenience of maintenance and operation;
6). During use, the sanitary gate valve must not be partially opened to adjust the flow rate, so as to avoid damage to the sealing surface when the medium flow rate is high, and it should be fully opened or fully closed;
7). It is not advisable to use other auxiliary levers to rotate the hand wheel when opening or closing;

Equivalent Material of 316L Stainless Steel

China * GB GB24511 022Cr17Ni12Mo2
Japan JIS SUS316L
United States of America ASTM 316L
UNS S31603
South Korea KS STS316L
European Union BSEN 1.4404
India IS ~02Cr17Ni12Mo2
Australia AS 316L
Taiwan, China CNS 316L
Germany DIN X2CrNiMo17-12-2
United Kingdom BS970 BS1449 316S12
Belgium BS970Part1

 

Standard Specification Of 316L coil

Thickness          0.3mm-12.0mm
Width       600mm, 700mm, 800mm, 900mm, 1000mm, 1200mm, 1220mm, 1500mm, etc
Length      Per Coil
Surface     2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc
Finish        Cold rolled coil (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form         Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats,
Blank (Circle), Ring (Flange) etc.

316L stainless steel composition content.

Grade C Mn Si P S Cr Mo Ni N
316L Min.
Max.
≤0.03 ≤2.00 ≤1.00 ≤0.045 ≤0.03 16.00~18.00 2.00~3.00 10.00~14.00

Tensile strength σb (MPa) : ≥480
Conditional yield strength σ0.2 (MPa) : ≥177
Elongation Δ5 (%) : ≥40
Section shrinkage ψ(%) : ≥60
Hardness: 187 hb or less;
90 HRB or less;
200 hv or less
Density: 7.98g/cm3;
Specific heat capacity ratio (20℃) : 0.502J/(g*K)

Contact Us Now!

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@zhongwusteel.cn to get prompt reply.

Send me the inquiry,free samples and the most favorable quotation are waiting for you!
Supply Better Material for Project & Find Best Solution for Clients
Wish your business boom and all the best!